Call Us Toll Free
   888.405.4446
 
Mustang CDC Products 2005 2006 2007 2008

CDC Quarter Window Blackouts 05-07

Part# 112040

Rear quarter window close outs, Charcoal headliner matched closeouts that enhance the interior appearance of the vehicle.

$31.00  


CDC 05-08 Mustang Windstop (Windscreen)

Part# 0511-7011-01

The CDC windstop (windscreen) is designed around the curvature of the CDC Light Bar, but can be used with out it also. The windstop (windscreen) extends the convertible driving season - The heating becomes more intensified - With the Windstop, the air movement becomes greatly diminished - The warm air in the driving compartment will be maintained Dramatic reduction of the noise level - The noise level around driver and passenger will be reduced by 50 %! This was independently confirmed with the various automobile manufactures through extensive testing. - You can once again talk comfortably on your cell phone and with the other passengers. - Traffic reports on the radio become understandable again - Enjoy listening to your favorite music again WINDSTOPs are made of a mesh fabric in an aluminum frame; the mesh itself reduces the turbulences. The windstop rests on the rear trim panels behind the CDC Lightbar and is held in place with two adjustable quick-release straps – no modification is needed to either the car or Lightbar! When not in use the WINDSTOP can be quickly unbuckled, folded, and stored in the trunk in its protective storage bag (included). The WINDSTOP does not impair rearward vision. The WINDSTOP complies with all the safety regulations of the car manufacturers.

$429.00 


CDC Billet Grille Tri-Bar Pony 05 +

Part# 0511-3000-01

Fits 2005/7 CDC Billet Tri-Pony Emblem. Mounts on  Billet Replacement Grille.

$45.00 


CDC Decklid Trim Panel - Plain

Part# 110904

Heritage styling combined with today's technology and engineering resulted in the creation of this OE quality ingrained Classic Deck Lid Trim Panel. This ABS panel finishes out the style of the rear end requires no drilling, NO paint and eliminates the FAKE gas cap.

$158.00


CDC 2005 + V6 Replacement Grill

Part# 0511-2001-05

Classic Design Concepts 05-08 V6 Billet Aluminum Grille for your Mustang. The CDC V6 Grille is a powder coated and clear coated replacement grille engineered for OE fit and finish. NO DRILLING, simply install the CDC grille using factory mounting points. The CDC replacement grille retains the factory radiator cover and factory radiator cover hardware.

$324.99 


CDC 2005 + Smooth C Pillar Scoops

Part# 110041

Designed and Manufactured by CDC. The Smooth C-Pillar Scoop attaches using ¼” wide x 1.125mm thick 3M Acrylic Foam bonding tape and requires NO drilling. This high OE quality part compliments the high quality style of your 2005-6 Mustang.

$198.99


CDC Decklid Trim Panel -GT Emblem

Part# 110903

Heritage styling combined with today's technology and engineering resulted in the creation of this OE quality ingrained Classic Deck Lid Trim Panel. This ABS panel finishes out the style of the rear end requires no drilling, NO paint and eliminates the FAKE gas cap.

$174.00


CDC Stars and Stripes Pony 05-07 Style

Part# 110200

Flag Horse available for 05-07 Mustangs. Take the original equipment running horse to the next level. Remove the factory horse and replace.

$47.00 


CDC B9 Hood Scoop

Part# 110056

B9 Hood Scoop is a universal design resulting in universal fitment. CDC has currently test fit the scoop on 04/05 F-150’s, 05/06 Mustang and F250/F350 Super Duty, with numerous other applications waiting to be discovered. B9 Product dimensions 20.75” wide across front tips 21.5” wide across center 19.25” wide at rear 27” back to front, to the longest points of the left/right tips at front 3.25” tall at center front 1.5” tall at rear, just as scoop tapers down to hood.

$262.00


CDC Trunk Detail Corral 05 +

Part# 0511-7000-12

CDC’s “Detail Corral” adds the finishing appearance to your inner Deck lid. Not only does it add appeal to the trunk it also provides storage capabilities, first aid, cleaning supplies, CDC mini duster (of course) and numerous other lightweight items, including some unmentionables. Installation is a breeze, some basic hand tools, a couple minutes and your “Detail Corral” is in saddled and ready to serve. Simply install the clamp-on mounting brackets and go… It is all in the details, no drilling required, all OE materials to provide factory appearance and fit, an engineered part for precise mechanically fastened fit. The Detail Corral is a perfect addition for a clean and unique appearance for car shows or everyday use. **Accessories not included**

$188.00 


CDC 2005-2008 Mustang Directional Mirrors

Part# 110909

Classic Directional Mirrors are available for 05-08 Mustangs When the turn signals are on, a red signal sign appears in the side view mirrors. High intensity LED's used (light emitting diodes) illuminate 180MS faster than conventional incandescent lamps. Application- snaps in and replaces factory mirror only (factory mirror housing is not replaced). Install time is 2 hours. Warranty 3-years.

$230.00


CDC Gauge Pod 05 +

Part# 110140

Designed and Engineered by CDC. This high temp ABS product (which will NOT distort in heat) is molded in black with a paintable smooth finish. Attachment process with acrylic bonding tape or dual lock velcro
- No Drilling Required-

Gauges sold separately. Any 2 1/16 - inch gauge will fit the Classic Cluster. Please note the gauge pod will not work on a 2007 with the interior upgrade package (vinyl wrap dash)

$100.00 


CDC GT500 Mustang Pedals - Automatic

Part# 110126

Mustang Pedals. The accelerator pedal is adhered with two way automotive bonding tape and the brake and clutch are simply slip on in place of the factory pedals.

$83.00


CDC GT500 Mustang Pedals - Manual

Part# 110125

Mustang Pedals. The accelerator pedal is adhered with two way automotive bonding tape and the brake and clutch are simply slip on in place of the factory pedals.

$104.00


CDC Hood Pin Appearance Kit

Part# 105109

Authentic Hood Pins. But these Hood Pins are unique; they do not require drilling into your hood. You just adhere them to your hood using the 3M bonding tape that is standard on this Zinc Die Cast, Chrome Plated, weather resistant hood pins. The lanyards and pins are stainless steel to maintain the quality appearance. Best yet they work on every vehicle; early, late, domestic or imports.

$66.00 


CDC Mustang Door Sills

Part# CDCSILLS

Custom Mustang Door Sills to give your 2005 Mustang open door appeal.

$41.00 


CDC 2005 + Hood Struts

Part# 0511-7012-35

2005 Mustang Hood Strut Kit is an engineered component that eliminates the factory hood prop system. The gas charged Struts and laser cut stainless steel brackets mount at factory bolt locations, requiring no drilling. Simple, functional, clean fit with an custom look. Strut your under hood wears with CDC’s Hood Strut Kit.

$104.00 


CDC V6 Chin Spoiler - Textured Black

Part# 110022P

The V6 Classic Chin Spoiler is engineered and manufactured by CDC. The V6 Chin Spoiler is made using high pressure RIM technology and urethane material. Designed to enhance the factory fascia while maintaining factory fit and finish and quality. The spoiler is available in textured black or raw. Simply install using the supplied self tapping screws and 3M Acrylic Bonding tape . Warranty - 3 years.

$284.00


CDC Light Bar - Charcoal

Part# 110000

CDC all new Classic Light Bar to fit the all new 2005-07 Mustang Convertible. They have kept the high quality, attention to fit and finish and have also simplified the installation process. The light bar has been shaped to fit the curves and natural lines of the vehicle to provide a factory fit. The high mounted LED light provides added safety with a highly visible brake light. If rain should attempt to spoil your cruise no fear, the factory top effortlessly fits over the light bar and the Classic Light Bar does not interfere with any original factory functions. The light bar is constructed of a sturdy 1 ¼” round steel tube, with a 1/8” wall thickness. This polyurethane piece is wrapped in vinyl, grained to match your car's interior trim. The bar is supplied with brackets that are mounted to the B pillars and they receive the Light Bar a sturdy mount and also stiffens the body. With in a couple hours your Mustang will be ready for the next convertible day. (Additional images are located on the bottom of this page) ***Not intended rollover protection***

$429.00


CDC Light Bar

CDC all new Classic Light Bar to fit the all new 2005-07 Mustang Convertible. They have kept the high quality, attention to fit and finish and have also simplified the installation process. The light bar has been shaped to fit the curves and natural lines of the vehicle to provide a factory fit. The high mounted LED light provides added safety with a highly visible brake light. If rain should attempt to spoil your cruise no fear, the factory top effortlessly fits over the light bar and the Classic Light Bar does not interfere with any original factory functions. The light bar is constructed of a sturdy 1 ¼” round steel tube, with a 1/8” wall thickness. This polyurethane piece is wrapped in vinyl, grained to match your car's interior trim. The bar is supplied with brackets that are mounted to the B pillars and they receive the Light Bar a sturdy mount and also stiffens the body. With in a couple hours your Mustang will be ready for the next convertible day. (Additional images are located on the bottom of this page) ***Not intended rollover protection***

$449.00

HOME 2005 UP 94-04 LINKS POLICY PRIVACY POLICY SITE MAP

Site Copyright 2007, V6 Mustang Stuff. All Rights Reserved.

V6 Mustang Stuff.com is not affiliated with Ford Motor Company.
Mustang, Mach 1, Cobra, Mustang Running Pony are registered trademarks of Ford Motor Company.