Baer 2005-2007 Mustang GT & V6 Rear 14" Upgrade Kit

Part# 2262019

14" Baer Rear 2 pc REAR upgrade brake kit for 2005-06 Mustang GT.

IMPROVE STOPPING PERFORMANCE NOW!
This is a great upgrade kit that uses your existing brake calipers. Kit uses new crossdrilled and slotted 14" 2-pc rotors and a bracket that relocates the caliper higher to accommodate larger rotors.
Kit comes with:
•Two-piece 14" diameter cross-drilled-slotted zinc washed rotors
•Includes all necessary brackets, hardware, and instructions for easy installation
•Must use 18" or larger wheels to install
Direct simple bolt on – no need to even open the brake lines!

$659.99

Baer 2005-2007 Mustang GT/V6 14" GT-PLUS Twin-piston Front Brake Kit

Part# 4261096

System engineering and integration ensure the greatest balance of performance and value. Furthermore, this approach ensures true “bolt-on” installation, which render consistent results, whether installed by an enthusiast or a professional.Baer’s approach is to offer systems matched to the individual requirements of its customers. So whether you require a system to package within the confines of a modest wheel that captures “the look” your ride demands or your concept requires something “Bigger and Badder”, Baer can prescribe a system to match your Mustang’s needs and fit your budget.
Baer Brake Systems is the US Performance Distributor of the Australian-based PBR calipers. PBR Aluminum low- inertia calipers are standard equipment on the Corvette C6 (as well as C4 & C5), Mustang Cobra, and a number of performance vehicles. Baer believes PBR pad guided and PDC pin-drive calipers are the finest floating aluminum calipers in the world. Baer’s GT-PLUS kits feature a 2-piece aluminum hat, cross-drilled & slotted rotor design, which saves on rotating weight, as well as helping to prevent heat seep from spreading to your Mustang’s wheel bearings. Both kits utilize PBR’s twin-piston aluminum caliper for maximum stopping potential!
• Requires use of 18" or larger wheels; not all 18" wheels are adequate, check with Baer online template
•Two-piece 14" diameter rotors
•PBR 2-Piston pin drive calipers
•front braided stainless steel brake hoses
•Includes all necessary brackets, hardware, and instructions for easy installation. Direct, simple bolt-on installation.

$1295.99

Baer 2005-2007 Mustang V6 14" Shelby Special Edition GT-PLUS Front Brake Kit (non/ ABS)

Part# 4261161

System engineering and integration ensure the greatest balance of performance and value. Furthermore, this approach ensures true “bolt-on” installation, which render consistent results, whether installed by an enthusiast or a professional.Baer’s approach is to offer systems matched to the individual requirements of its customers. So whether you require a system to package within the confines of a modest wheel that captures “the look” your ride demands or your concept requires something “Bigger and Badder”, Baer can prescribe a system to match your Mustang’s needs and fit your budget. Baer Brake Systems is the US Performance Distributor of the Australian-based PBR calipers. PBR Aluminum low- inertia calipers are standard equipment on the Corvette C6 (as well as C4 & C5), Mustang Cobra, and a number of performance vehicles. Baer believes PBR pad guided and PDC pin-drive calipers are the finest floating aluminum calipers in the world. Baer’s GT-PLUS kits feature a 2-piece aluminum hat, cross-drilled & slotted rotor design, which saves on rotating weight, as well as helping to prevent heat seep from spreading to your Mustang’s wheel bearings. Both kits utilize PBR’s twin-piston aluminum caliper for maximum stopping potential!
• Features "Shelby" Logo on Caliper
• Requires use of 18" or larger wheels; not all 18" wheels are adequate, check with Baer online template •PBR 2-Piston pin drive calipers
•front braided stainless steel brake hoses
•Includes all necessary brackets, hardware, and instructions for easy installation. Direct, simple bolt-on installation.

$1319.99

Baer 2005-2007 Mustang V6 14" Shelby Special Edition GT-PLUS Front Brake Kit (w/ ABS)

Part# 4261111

System engineering and integration ensure the greatest balance of performance and value. Furthermore, this approach ensures true “bolt-on” installation, which render consistent results, whether installed by an enthusiast or a professional.Baer’s approach is to offer systems matched to the individual requirements of its customers. So whether you require a system to package within the confines of a modest wheel that captures “the look” your ride demands or your concept requires something “Bigger and Badder”, Baer can prescribe a system to match your Mustang’s needs and fit your budget. Baer Brake Systems is the US Performance Distributor of the Australian-based PBR calipers. PBR Aluminum low- inertia calipers are standard equipment on the Corvette C6 (as well as C4 & C5), Mustang Cobra, and a number of performance vehicles. Baer believes PBR pad guided and PDC pin-drive calipers are the finest floating aluminum calipers in the world. Baer’s GT-PLUS kits feature a 2-piece aluminum hat, cross-drilled & slotted rotor design, which saves on rotating weight, as well as helping to prevent heat seep from spreading to your Mustang’s wheel bearings. Both kits utilize PBR’s twin-piston aluminum caliper for maximum stopping potential!
• Features "Shelby" Logo on Caliper
• Requires use of 18" or larger wheels; not all 18" wheels are adequate, check with Baer online template •PBR 2-Piston pin drive calipers
•front braided stainless steel brake hoses
•Includes all necessary brackets, hardware, and instructions for easy installation. Direct, simple bolt-on installation.

$1319.99

Centric Premium Brake Rotors Front 05-08 V6

Part# 120.61085

Centric Premium brake rotors set a new standard for OEM replacement brake rotors. Centric Premium rotors feature 100% machined finishes, which means every part of the rotor is manufactured with strict tolerances. The Premium rotors feature completely electroplated surfaces, which provide protection from corrosion and rust. The rotors hubs, edges, and fins are powder coated to protect the rotor and give them a nice high performance appearance. Lastly, the Premium rotors feature double disc grinding. This grinding process prepares the surface of the rotor for the most optimal braking, pad wear, and smoother stopping. These are one of the best OEM replacement rotors for your Ford Mustang.

Premium Rotor Features:

Electroplated rotor surface
Powder coated hubs and edges
Double disc grinded rotor surface
ISO 9001 quality controlled production
Price includes front set, both left and right rotors.

$159.99

Centric Premium Brake Rotors Rear 05-08 V6

Part# 120.61087

Centric Premium brake rotors set a new standard for OEM replacement brake rotors. Centric Premium rotors feature 100% machined finishes, which means every part of the rotor is manufactured with strict tolerances. The Premium rotors feature completely electroplated surfaces, which provide protection from corrosion and rust. The rotors hubs, edges, and fins are powder coated to protect the rotor and give them a nice high performance appearance. Lastly, the Premium rotors feature double disc grinding. This grinding process prepares the surface of the rotor for the most optimal braking, pad wear, and smoother stopping. These are one of the best OEM replacement rotors for your Ford Mustang.

Premium Rotor Features:

Electroplated rotor surface
Powder coated hubs and edges
Double disc grinded rotor surface
ISO 9001 quality controlled production
Price includes front set, both left and right rotors.

$119.99

Centric Standard Brake Rotors Front 05-08 V6

Part# 121.61085

Centric Standard brake rotors are designed to be a cost effective OEM replacement rotor for your Ford Mustang. Centric rotors are manufactured with strict tolerances, and high quality standards. It is important when choosing an OEM replacement rotor to be certain that they will last for a long time, and through many miles... Centric meets those demands.

Standard Rotor Features:

High quality and value
Double disc grinded rotor surface
OE fit and finish
ISO 9001 quality controlled production
Price includes front set, both left and right rotors.

$139.99

Hawk 05-07 GT & V6 HP-Plus Rear Brake Pads

Part# HB485N656

Direct replacement pads for the 05-07 GT / V6 Rear Brakes
Hawk Hi-Performance brake pads are race proven at all levels to deliver maximum stopping power without compromise.
Available in 10 different compounds ranging from high-performance street to full PPG CART race applications, we highly recommend the HPS compound for high performance street applications or the HP-PLUS for high-performance street PLUS race worthy for club events and driving schools.
Race compounds are available for all applications.
High performance street materials require bedding procedures to be applied to ensure maximum pad and rotor life.

$89.99